| 209 |
| # | Feed Bowl Pockets | Hose Size (I.D.) | Maximum Aggregate Size | Air Compressor
(Recommended size at 100 psi) | Maximum Output** | Common Applications |
1 | 18 | 3/4" | 1/8" | 125 cfm | 2 yd3/hr
(1.5 m3/hr) | fine, detailed artistic-type work, rockscaping, patch repair. |
2 | 18 | 1" | 1/4" | 210 cfm | 2 yd3/hr
(1.5 m3/hr) | fine, detailed, artistic-type work, rockscaping, patch repair. |
3 | 18 | 1-1/4" | 1/4" | 315-375 cfm |
4 yd3/hr
(3 m3/hr) |
Refractory Spraying, repair work, smooth finish. |
4 | 16 | 1-1/4" | 1/4" | 315-375 cfm | 6 yd3/hr
(4.6 m3/hr) | Refractory Spraying, repair work, smooth finish. |
5 | 16 | 1-1/2" | 3/8" | 315-375 cfm | 9 yd3/hr
(6.9 m3/hr) | Refractory Spraying, repair work, smooth finish |
|
* electric motor drive: subtract roughly 90 SCFM (2.5M/MIN) from air requirement if electric motor used. |
** additional air may be required depending on altitude and atmospheric pressure. |
209 COMPONENT OPTIONS:
(All sizes and configurations do not go together.)
HOPPER: (Flat Hopper with Bag Breaker).
Flat Hopper with Bag Breaker is generally used in refractory applications and with pre-bagged materials.
MOTOR:
Air Motor (Rotary Vane Direct Drive): 8AM (5hp)
Air motor will deliver a feed wheel rotation of 50 r.p.m.'s down to 2 r.p.m.'s by throttling the
air supply to the motor.
Optional Electric Motor Drive with wide variety of voltages, hertz and phases is available upon request.
Subtract roughly 90 SCFM (2.5M/MIN) from air requirements above if electric motor used.
FEED BOWLS: (16 pocket, 18 pocket).
More pockets = Smoother Finish, Fewer Pockets = More Output
AIR HOSE / MATERIAL HOSE: We highly recommend using the same size air and material hoses.
Special Gunite Hose or Refractory hose is used for material
Larger aggregates require the larger material hoses in order to prevent hose blockages.
GOOSENECK: (1-1/4", 1-1/2").
Liner Type - abrasion resistant liner is replaceable.
Sold Steel - is maintained by hard-facing as wear occurs.
WEAR PAD: Only one wear pad for the 16 pocket and one for the 18 pocket.
MESH SCREEN: (15/16")(3/4").
Keeps large aggregate out of the hopper.
BAG BREAKER:Sits on top of the hopper. Used with bagged material.
AGITATOR: Used to agitate the material. Comes with a 2 blade agitator.
OPTIONAL EQUIPMENT:
Gunite Nozzles:
1.25" Hydro Nozzle
1.5" Hydro Nozzle
Vibrator: Assists in feeding material into the pockets.
Skid Mounting: Mainly for underground applications.
Bulk Bag Adapter: Used with "Super-sacks" or "Bulk Bags". Prevents injury and reduces dust.
Electric Motor Drive: Electric Motor Drive with wide variety of voltages, hertz and phases is available upon request.
|
