REED - Used Concrete Pumps, Shotcrete Pumps and Gunite Machines.

REED 32-Meter XXT32 (1999) "Dragonfly" Outriggers. S/N: 99-194-XXT32. Mounted on 1999 Mack VIN#1M2K189C7XM014221. E7350 9 speed. About 400,000 miles, about 14,000 hours, about 1,800 pump hours. Pipe done 10/04. Hydraulic oil done 12/06. New oil pump & fuel pump 4/05. New clutch, clutch brake, synchronizers in transmission 1/07. New front main A4VG125 pump 7/06. (A4VG rear replaced before 2/04). Rechromed drive cylinder rods, hone cylinders, replaced cylinder pistons and seals 9/06. New material cylinders 9/06. New hydraulic oil (and filter) and all gear oils 12/06. Turret gear reduction gear rebuilt 2/06. Brakes 85-95%. Tires 100%. New agitator/water control block. Water pump 2 years old. Accumulator pump 7/06. A-C-D sections hollow pins replaced 2/06. Cutting ring & wear plate 100%. (Needs frame bolts and few welds on brackets on boom.) Pump located near Ft. Worth, Texas. Contact REED for more info: 909-287-2100. PRICE $150,000

REED 36-Meter ST36 (1998) "Dragonfly" Outriggers. S/N: 98-171-ST36. Mounted on 1998 MACK VIN # 1M2K189COWMO12633. Truck Hours: 14,400. Complete in frame engine overhaul 10/07: All new heads, cylinders, pistons, rings and mains, new injector nozzles, radiator recored, new air compressor, new turbo. Mileage: 372,400 (Mileage not accurate due to odometer running while pump is in PTO). Pump Hours 1,535. Pump: 8/06 Wear components, cutting ring & wear plate. Boom Inspection 11/06. Boom Pipe 80%. Hydraulic oils 2/07. Tires 75%. Pump located in New Mexico. Contact REED for more info: 909-287-2100. PRICE $160,000

REED 36-Meter XT36 (2000) "X-Style" Outriggers. S/N: 00-193-XT36. Mounted on 1999 Mack VIN#1M2K189C9YM015100. About 244,000 miles, about 4,900 hours, about 1,950 pump hours. Pipe done 3/06. Hydraulic oil done 6/06. All gear oils replaced 12/06. New A4VG125 front and rear main pumps 6/06. Accumulator pump 5/06. Cutting ring 100%. Wear plate 10%. New hollow pin A-C-D sections 9/05. Boom to turret bushing 9/05. Swing ram clevis 9/05. (Needs wear plate, rear tires, rear brakes). Pump located near Ft. Worth, Texas. Contact REED for more info: 909-287-2100. PRICE $195,000

REED 42-Meter XXT42 (2003) S/N: 03-223. "Dragonfly" Outriggers. Only 550 pump hours. 2251 engine hours. 125,144 truck miles. 4-section roll-and-fold boom will be re-mounted after order is placed. (Removed when the hydraulic tank was replaced). New augers. New White brand remixer motors. New auger seals and shaft. New hopper wear parts. New piston cups. Mounted on 2001 Mack truck. Pump located in Chino, CA. Contact REED for more info: 909-287-2100. PRICE $210,000

REED 42-Meter XXT42 (2000) "Dragonfly" Outriggers. S/N: 00-209-XXT42. Mounted on 1998 4-axle Mack VIN#1M2K197C1XM013106. About 450,000 miles, about 16,100 hours, about 1,600 pump hours. Pipe done 12/05. Hydraulic oil done 12/06. New front main pump A4VG125 12/06. New back charge pump 12/06. All gear oils replaced 12/06. New accumulator pump 2/06. Cutting ring and wear plate 100%. Tires 90% Brakes 95%. (Needs few stress cracks welded). Pump located near Ft. Worth, Texas. Contact REED for more info: 909-287-2100. PRICE $235,000

Schwing 32-Meter (1989) Schwing BPL 1200 HDR-20, KVM 32/28 1989, rock valve, tires good. Mounted on 2004 International model 7600 with Eaton Fuller transmission, 42,0000 miles, Omnex black and white radio remote control. June 2007 boom inspection. Pump located in Canada. Contact REED for more info: 909-287-2100. PRICE $185,000 U.S.D.

REED A30HP (2007) 324 hours. Radio remote. Excellent condition. 5” X 30” material cylinders, in excellent condition. Pump located in Oregon. Contact REED for more info: 909-287-2100. PRICE $35,300

REED 4040B (1995) 40 yard per hour rating. S/N 3.95.1.1250. Deutz F4L912. Hours unknown. The pump has been serviced and inspected and is in ready to work shape. 67-horse power 4 cylinder Deutz diesel, 40-yard per hour, 1160-psi concrete face pressure. 6"x36" material cylinders. Pump located in Phoenix, Arizona. AS IS. Contact REED for more info: 909-287-2100. Contact REED for more info: 909-287-2100. PRICE $21,700

REED M40 (1997) 1950 hours, 40 yard per hour rating. Up to 1" rock rating. Deutz Diesel Engine. New tires. 140' of 3" line hose. 200' of 2" line hose. All clamps included. Well maintained. Work ready. Pump located in California. Contact REED for more info: 909-287-2100. PRICE $38,500 (includes system)

REED B50 (2005) 50 yard per hour rating. S/N 3.05.1.2335. 1063 hours. Deutz 98 H.P. water cooled with hydraulic outriggers. 6” x 36” material cylinders, 1361 concrete face pressure. New wear parts, serviced and inspected. Pump is in excellent condition and ready to work. Pump located in Phoenix, Arizona. Contact REED for more info: 909-287-2100. PRICE $49,500

REED B50 (2005) and GMC 3500 Truck (2500) s/n: 3.06.1.2380. 450 hours. Hopper agitator, radio remote, murphy switch. 250 ft. (3" hose) 200 ft. (2" hose). Clamps, reducers, elbows, and 3" stand tube all included. Maintained well and in very good condition. 2005 GMC 3500 - VIN # 1GDJC34UX5E230208 - 6.0 L gas engine, 12' flatbed with stake gates all removable. Only 11,000 miles. Well maintained and in excellent condition. Pump located in San Diego, California. Contact REED for more info: 909-287-2100. PRICE $96,690

REED C50HP (2006) 151 hours, great shape. Come with 150' of 2-1/2" Goodyear hose, all reducers, clamps, etc. Located in Arkansas. Contact REED for more info: 909-287-2100. PRICE $80,550

Blastcrete RD 6536 Trailer mounted unit. 160in long, 88in wide, 45in high, weight 3900lb, pumps 25 yph, 3 inch discharge, and 10 gallon fuel tank. 35 HP Briggs and Stratton has a electric start. Hours -350(it does not have a hour meter, so this is a estimation). Rebuilt by Blastcrete last year to update the concrete pumping system, to modern specs (those upgrades are listed below). Upgrades: The pump head was completely disassembled. New bearings, sprockets, chain, and roller shafts were installed in the pump head along with a new pumping tube. The receiving hopper received a new bearing and shaft on the drive side of the agitator. This pump is very well maintained, all hoses and fittings are in good shape with no leaks. The Briggs and Stratton 35 hp motor has had its oil changed on a regular bases, and is also it great shape. Located near Georgia. Contact REED for more info: 909-287-2100. PRICE $24,750

Mayco LST-60 Hatz Diesel. 1300 hours. 80 HP. Pump located in Oregon. Contact REED for more info: 909-287-2100. PRICE $36,800

Mayco C30HD Refurbished ball valve with 30 HP Wisconsin engine 100' of 2" hose. Pump located in Oregon. Contact REED for more info: 909-287-2100. PRICE $12,800

Olin 5-65 (2005) 1252 hours. 53 yard per hour ball valve pump. Deutz diesel. Located in Oregon. Contact REED for more info: 909-287-2100. PRICE $35,300

Putzmeister 2065 (year?) 65 yard per hour rating. Remixer/agitator. Pump located in Oregon. Contact REED for more info: 909-287-2100. PRICE $39,000

Putzmeister Katt-Kreter (2002) 2324 hours. S/N 2106T0500 Pump located in North Carolina. Contact REED for more info: 909-287-2100. PRICE $27,500

Putzmeister 2050HP (1995) Unit # 21 has 1,861.1 hours. Pump located in Chino, CA. Contact REED for more info: 909-287-2100. PRICE $18,500

Putzmeister 2050HP (1995) Unit # 22 has 1,812.5 hours. Pump located in Chino, CA. AS IS. Contact REED for more info: 909-287-2100. PRICE $18,500

Schwing WP500X (1999) 2,266 Hours. Rock Valve Pump with Radio Remote & Dual Axle. Fair condition. Pump located in Fresno, CA. Contact REED for more info: 909-287-2100. PRICE $30,000

*Disclaimer: REED is not responsible for any items sold on this page. It is your responsibility to verify the equipment being sold is as stated. Additionally, REED will not be responsible for any typographical errors.

Used Equipment