From: Don Brown - Reed Manufacturing
Sent: Wednesday, August 01, 2007 9:09 AM
To: Mike Newcomb
Subject: FW: HAWE PSL valve seal info

Attachments: Resealing between sections - english.ppt; PSL-2 seal kit.pdf; PSL-3 seal kit.pdf
Don Brown 
Customer Service Representative 
REED Concrete Pumps & Gunite Machines
13822 Oaks Avenue
Chino, CA  91710   US

Toll-Free: (888) 779-7333
Tel: (909) 287-2149
Fax: (909) 287-2141

From: Ron McVicker
Sent: Tuesday, July 31, 2007 12:26 PM
To: Don Brown - Reed Manufacturing
Subject: FW: HAWE PSL valve seal info

Check it out



From: Doug Hite []
Sent: Tuesday, July 31, 2007 12:16 PM
To: Ron McVicker
Subject: HAWE PSL valve seal info




Attached is the seal kit information for the HAWE PSL size 2 and 3 control valves.

Also attached is the procedure for dissembling and reassembling the valve for proper operation.


The order you referred to from March 2005 was the control valve noted below. PSL size 2.


DC-236 for Reed Mfg

PSL 31/250-2

-A1 L25/25 /EA/2

-A1 L25/25 /EA/2

-E 4-G 12


The part numbers you gave me on the phone, DS 7700-32 and DS 7700-31 are for the size 3 valves.

Best regards,


Doug Hite
Application Engineer
HAWE Hydraulics
9009-K Perimeter Woods Drive
Charlotte, NC 28216
Direct (704) 927-5612
Main (704) 509-1599
Fax (704) 509-6302