|
REED
warrants each of its new Truck Mounted Concrete
Boom Pumps to be free of defects in material
and workmanship under normal use and service
for a period of TEN-FIVE-TWO years from
date of delivery based on the following
conditions:
:
TEN (10) YEARS covering the steel
structural parts
:
FIVE (5) years covering the Seimens
PLC (Programmable Logic Control)
:
TWO (2) year or 4000 pumping hours
whichever comes first, covering "bumper
to bumper"
excluding:
Truck
(truck is covered under Mack warranty)
and
Wear Parts
The
WARRANTY is issued ONLY to the INITIAL USER.
The warranty periods begins when the product
is delivered to the initial user or when
first put into service, whichever occurs
first. Said warranty is void if the machine
is subject to misuse, neglect, accident
or abuse. The STRUCTURAL WARRANTY will be
honored only if regular inspections have
taken place and repairs are executed as
per the recommendations of the inspection(s).
All inspections and inspection requirements
must meet the applicable ASME (American
Society of Mechanical Engineers) standards
as described by volume B30.27. The STRUCTURAL
WARRANTY will be honored only if the equipment
is used per ASME B30.27 and all applicable
ACPA (American Concrete Pumping Association)
recommendations and requirements. This part
of the Warranty includes only those parts
which are central components to the structure
of the Boom and Pedestal. REED'S obligation
under this warranty is limited to correcting
without charge, at its factory, any part
or parts thereof which shall be returned
to its factory, transportation prepaid and
upon REED'S examination proves to have been
originally defective. Correction of such
defects by repair or replacement shall constitute
fulfillment of all obligations to the initial
user. This warranty does not include labor
or transportation charges unless specifically
identified and authorized in writing by
REED. Nor does the warranty apply to any
unit upon which repairs or unauthorized
alterations have been made. This warranty
does not apply to normal maintenance service
or to normal replacement of certain machine
parts, which are subject to normal wear
(such as concrete cylinders and wear components,
valve mechanisms, delivery systems and bracketry,
chassis decking / walkways, steps and hand
rails, hopper grate, etc.) REED makes no
warranty in respect to trade accessories
or outside vendor components including truck
chassis, such being subject to the warranties
of their respective manufacturers. THIS
IS A LIMITED WARRANTY AND IS IN LIEU OF
ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. In
no event shall REED be liable for incidental,
general or consequential damages, loss or
any expense directly or indirectly related
and resulting from use or lack of use caused
by delay in delivery, parts failure, or
any other causes associated with the product
use. No person, firm or corporation is authorized
to assume for REED any other liability in
connection with the sale of REED products.
|
